Stephen J. Gaul, Nicolaas van Vonno, Steven H. Voldman, Wesley H. Morris

Integrated Circuit Design for Radiation Environments (eBook, PDF)

• Format: PDF

Produktbeschreibung

A practical guide to the effects of radiation on semiconductor components of electronic systems, and techniques for the designing, laying out, and testing of hardened integrated circuits This book teaches the fundamentals of radiation environments and their effects on electronic components, as well as how to design, lay out, and test cost-effective hardened semiconductor chips not only for today's space systems but for commercial terrestrial applications as well. It provides a historical perspective, the fundamental science of radiation, and the basics of semiconductors, as well as radiation-induced failure mechanisms in semiconductor chips. Integrated Circuits Design for Radiation Environments starts by introducing readers to semiconductors and radiation environments (including space, atmospheric, and terrestrial environments) followed by circuit design and layout. The book introduces radiation effects phenomena including single-event effects, total ionizing dose damage and displacement damage) and shows how technological solutions can address both phenomena. * Describes the fundamentals of radiation environments and their effects on electronic components * Teaches readers how to design, lay out and test cost-effective hardened semiconductor chips for space systems and commercial terrestrial applications * Covers natural and man-made radiation environments, space systems and commercial terrestrial applications * Provides up-to-date coverage of state-of-the-art of radiation hardening technology in one concise volume * Includes questions and answers for the reader to test their knowledge Integrated Circuits Design for Radiation Environments will appeal to researchers and product developers in the semiconductor, space, and defense industries, as well as electronic engineers in the medical field. The book is also helpful for system, layout, process, device, reliability, applications, ESD, latchup and circuit design semiconductor engineers, along with anyone involved in micro-electronics used in harsh environments.

---

Dieser Download kann aus rechtlichen Gründen nur mit Rechnungsadresse in A, B, BG, CY, CZ, D, DK, EW, E, FIN, F, GR, HR, H, IRL, I, LT, L, LR, M, NL, PL, P, R, S, SLO, SK ausgeliefert werden.

Produktdetails

• Verlag: John Wiley & Sons
• Seitenzahl: 392
• Erscheinungstermin: 3. Dezember 2019
• Englisch
• ISBN-13: 9781118701874
• Artikelnr.: 58421568

Autorenporträt

STEPHEN J. GAUL is a Senior Principal Engineer at Renesas Electronics Americas, Inc., Florida, USA. He has worked in the semiconductor/integrated circuit field for over 35 years and has authored many papers and over 35 patents, many specific to radiation-hard/radiation-tolerant techniques. NICOLAAS VAN VONNO is currently a Principal Engineer at Renesas Electronics Americas, Inc., Florida, USA, and has been an independent consultant in the radiation effects field. He has been Guest Editor, Session Chairman, and Short Course Chairman for the IEEE Nuclear and Space Radiation Effects Conference (NSREC). STEVEN H. VOLDMAN, Ph.D., is a Consultant on ESD and latchup, as well as invention and patenting. He is a Fellow of the Electrical and Electronics Engineers (IEEE) and author of over 10 books and 262 patents. WESLEY H. MORRIS is President of Silicon-X (Technology focus), hardening CMOS devices to radiation and extreme temperatures. His career experience includes development of RH CMOS devices with SOS (RCA) and SOI (Harris), the first to prove bulk CMOS devices can be made latchup immune to extreme SEE radiation and operate reliably at high temperatures (250C). Morris is an author/inventor with multiple papers and patents related to RH and HT topics.

Inhaltsangabe

About the Authors xiii Preface xix Acknowledgments xxiii Glossary of Terms
xxv 1 Introduction and Historical Perspective 1 1.1 Introduction 1 1.2
Discovery of X-Rays, Radiation, and Subatomic Particles 2 1.3 The Nuclear
Age 8 1.4 The Space Age 9 1.5 Semiconductors - Revolution, Evolution, and
Scaling 15 1.6 Beginning of Ionizing Radiation Effects in Semiconductors 20
1.7 Beginning of Single-Event Effects in Semiconductors 22 1.8 Summary and
Closing Comments 26 References 27 2 Radiation Environments 31 2.1
Introduction 31 2.2 X-Rays, Gamma Rays, and the Atom 31 2.2.1 X-Rays 31
2.2.2 X-Ray Absorption 34 2.2.3 Auger Electrons 36 2.2.4 Nuclear Structure
and Binding Energy 36 2.2.4.1 Models of the Nucleus 38 2.2.5 Alpha and Beta
Decay 50 2.2.5.1 Alpha Decay 51 2.2.5.2 Beta Decay 52 2.2.6 Gamma-Ray
Emission or Gamma Decay 53 2.2.7 Other Types of Nuclear Radiation 54 2.3
Natural Radioactivity 55 2.3.1 Exponential Decay 55 2.3.2 Decay Series 56
2.4 The Space Environment 58 2.4.1 Solar Radiation 59 2.4.2 Trapped
Radiation 62 2.4.3 Cosmic Rays 66 2.4.4 Atmospheric Neutrons 69 2.5 The
Nuclear Reactor Environment 71 2.6 The Weapons Environment 75 2.7 The
Environment in High-Energy Physics Facilities 78 2.8 Summary and Closing
Comments 80 References 81 3 Radiation Effects in Semiconductor Materials 85
3.1 Introduction 85 3.2 Basic Effects 86 3.2.1 Heavy Charged Particles 86
3.2.1.1 Stopping Power 86 3.2.1.2 Electronic Stopping 87 3.2.1.3 Nuclear
Stopping 92 3.2.2 Electrons 93 3.2.2.1 Electromagnetic Radiation 93 3.2.2.2
Stopping Power 96 3.2.3 Neutrons 101 3.2.3.1 Neutron Cross Section 102
3.2.3.2 Interactions with Matter 103 3.2.4 Photons (X-Rays, Gamma Rays) 106
3.2.4.1 Photoelectric Effect 107 3.2.4.2 Compton Scattering 108 3.2.4.3
Pair Production 109 3.2.4.4 Photonuclear Reactions 110 3.3 Charge Trapping
in Silicon Dioxide 111 3.3.1 Charge Generation/Recombination 111 3.3.1.1
Geminate and Columnar Models 112 3.3.1.2 Geminate Recombination 113 3.3.1.3
Columnar Recombination 115 3.3.1.4 Numerical Methods 117 3.3.2 Hole
Trapping and Transport 118 3.3.2.1 E' Centers 120 3.3.2.2 Continuous-Time
Random-Walk (CTRW) 122 3.3.3 The Silicon/Silicon Dioxide Interface 124
3.3.3.1 Interface Traps 125 3.3.3.2 Border Traps 127 3.3.3.3 Hydrogen 128
3.3.3.4 ELDRS 130 3.4 Bulk Damage 131 3.5 Summary and Closing Comments 133
References 135 4 Radiation-Induced Single Events 143 4.1 Introduction -
Single-Events Effects (SEE) 143 4.1.1 Single-Event Upsets (SEU) 143 4.1.2
Multiple-Bit Upset (MBU) 143 4.1.3 Single-Event Transients (SET) 144 4.1.4
Single-Event Functional Interrupts (SEFIs) 144 4.1.5 Single-Event Disturb
(SED) 145 4.1.6 Single-Event Snapback (SESB) 146 4.1.7 Single-Event Latchup
(SEL) 146 4.1.8 Single-Event Burnout (SEB) 146 4.1.9 Single-Event Gate
Rupture (SEGR) 147 4.1.10 Single-Event Hard Errors (SHE) 147 4.2
Single-Event Upset (SEU) 148 4.2.1 SEU - Memory 148 4.2.2 SEU in CMOS
Memory 148 4.2.3 SEU in Bipolar Memory 148 4.2.4 SEU in CMOS SRAM 149 4.2.5
SEU in Future Technology - FINFETs 149 4.3 SEU - Particle Sources 149 4.3.1
SEU Source - Alpha Particles 150 4.3.2 SEU Source - Pions and Muons 152
4.3.3 SEU - Neutrons 153 4.3.4 SEU Source - Protons 153 4.3.5 SEU - Heavy
Ions 154 4.4 Single-Event Gate Rupture (SEGR) 154 4.4.1 Definition SEGR 155
4.4.2 SEGR Source - Ion Track 155 4.4.3 SEGR Source - Failure Mechanism 156
4.4.4 SEGR - Modeling and Simulation 156 4.4.5 Power Transistors and SEGR
156 4.4.5.1 Lateral Power Transistors SEGR 156 4.4.5.2 Vertical MOS (VMOS)
SEGR 157 4.4.5.3 Advanced Technologies - Planar MOSFET SEGR 157 4.5
Single-Event Transients (SETs) 158 4.5.1 SET Definition 158 4.5.2 SET
Source 158 4.5.3 SET Source Failure Mechanisms 159 4.5.4 SET in Integrated
Circuits 159 4.5.4.1 Digital Circuitry 159 4.5.4.2 Continuous Time Analog
Circuitry 159 4.5.5 Prediction and Hardening 159 4.6 Single-Event Latchup
(SEL) 159 4.6.1 SEL Definition 160 4.6.2 SEL Source 160 4.6.3 SEL Time
Response 161 4.6.4 SEL Maximum Charge Collection Evaluation in a
Parallelepiped Region 162 4.6.5 A SEL Design Practice 164 4.6.6 SEL
Semiconductor Device Simulation 165 4.7 Summary and Closing Comments 165
References 166 5 Radiation Testing 173 5.1 Introduction 173 5.1.1 Radiation
Units and Measurements 173 5.2 Radiation Testing and Sources 175 5.2.1
Total Ionizing Dose (TID) Testing 176 5.2.2 Total Ionizing Dose (TID)
Sources 179 5.2.3 Single-Event Effects (SEE) Testing 182 5.2.4 Single-Event
Effects (SEE) Sources and Facilities 187 5.2.5 Neutron Testing 192 5.2.6
Neutron Sources 193 5.2.7 Proton Testing 195 5.2.8 Proton Sources 196 5.2.9
Transient Gamma Testing 197 5.2.10 Transient Gamma Sources 198 5.3 Summary
and Closing Comments 201 References 204 6 Device Modeling and Simulation
Techniques 209 6.1 Introduction 209 6.2 Device Modeling 210 6.2.1 Circuit
Simulators 211 6.2.2 Intrinsic Models 212 6.2.3 Composite Models and Inline
Subcircuits 212 6.2.4 Analysis and Statistics Programs 214 6.3 Radiation
Effects on Semiconductor Devices 215 6.3.1 MOS Capacitors and Transistors
215 6.3.1.1 MOS Capacitors 216 6.3.1.2 MOS Transistors 219 6.3.2 Diodes and
Bipolar Transistors 224 6.3.2.1 Diodes 224 6.3.2.2 Bipolar Transistors 225
6.3.3 Power Devices 230 6.3.3.1 DMOS Composite Models 231 6.3.3.2 Operating
Voltage 232 6.3.4 Other Devices 232 6.3.4.1 Junction Field Effect
Transistors (JFETs) 232 6.3.4.2 Resistors 234 6.3.4.3 Capacitors 235 6.3.5
Some Modeling Challenges 235 6.4 Circuit Simulation 236 6.4.1 Corner
Simulation 236 6.4.2 SEE Simulation 239 6.5 Summary and Closing Comments
242 References 244 7 Radiation Semiconductor Process and Layout Solutions
249 7.1 Introduction 249 7.2 Substrate Hardened Technologies 249 7.2.1
Silicon-on-Insulator (SOI) Technologies 250 7.2.1.1 Separation by Implanted
Oxygen (SIMOX) 250 7.2.1.2 Silicon-Bonded (SIBOND) Technology 250 7.2.2
Silicon on Sapphire (SOS) 251 7.2.3 Silicon on Diamond (SOD) 252 7.2.4
Silicon on Nothing (SON) 252 7.3 Oxide Hardening Technologies 253 7.3.1
Oxide Growth and Fluorination of Oxide 253 7.3.2 MOSFET Gate Oxide
Hardening 253 7.3.3 Recessed Oxide (ROX) Hardening 254 7.3.4 LOCOS
Isolation Hardening 254 7.3.5 Shallow Trench Isolation (STI) Hardening 254
7.4 CMOS Latchup Process Solutions 255 7.5 CMOS Substrates -
High-Resistance Substrates 255 7.5.1 50Omega-cm Substrate Resistance 259
7.6 Wells 260 7.6.1 Single Well - Diffused N-Well 261 7.6.2 Single Well -
Retrograde N-Well 261 7.6.3 Dual-Well Technology 262 7.6.3.1 P-well and P++
Substrate 262 7.6.3.2 P-Well and P+ Connecting Implant 263 7.7 Triple-Well
Technology 264 7.7.1 Triple Well - Full Separation of Wells 264 7.7.2
Triple Well - Merged Triple Well 265 7.7.3 Triple Well - Merged Triple Well
with Blanket Implant 266 7.8 Sub-Collectors 266 7.8.1 Epitaxial Grown
Sub-Collector 266 7.8.2 Implanted Sub-Collector 267 7.8.3 Sub-Collector -
NPN and PNP Bipolar Current Gain 267 7.8.4 Sub-Collector - Beta Product
beta PNP beta NPN 267 7.9 Heavily Doped Buried Layers (HDBL) 268 7.9.1
Buried Implanted Layer for Lateral Isolation (BILLI) Process 268 7.9.2
Continuous HDBL Implant 268 7.9.3 Buried Guard Ring (BGR) 270 7.10
Isolation Concepts 270 7.10.1 LOCOS Isolation 270 7.10.2 Shallow Trench
Isolation (STI) 270 7.10.3 Dual Depth Isolation 271 7.10.4 Trench Isolation
(TI) 272 7.10.4.1 Trench Isolation (TI) and Sub-Collector 274 7.11 Deep
Trench 277 7.11.1 Deep Trench (DT) within PNPN Structure 279 7.11.2 Deep
Trench Structure and Sub-Collector 281 7.11.3 Deep Trench Structure and
Merged Triple Well 283 7.12 Layout Solutions 284 7.12.1 Polysilicon Bound
Structures 284 7.12.2 Parasitic Isolation Device (PID) 284 7.13 Summary and
Closing Comments 286 References 287 8 Single-Event Upset Circuit Solutions
293 8.1 Introduction 293 8.2 CMOS DRAM SEU Circuit Solutions 293 8.2.1 CMOS
DRAM Redundancy 294 8.2.2 CMOS DRAM with SRAM Error Correction 294 8.3 CMOS
SRAM SEU Circuit Solution 296 8.3.1 CMOS SRAM Four-Device Cell 296 8.3.2
CMOS SRAM Six-Device Cell 297 8.3.3 CMOS SRAM 12-Device Cell 298 8.4
Bipolar SRAM 299 8.4.1 Bipolar SRAM Cell with Resistor Loads 300 8.4.2
Bipolar SRAM Cell with Resistor Loads and Schottky Clamps 300 8.4.3 Bipolar
SRAM Cell with PNP Transistors 301 8.5 Bipolar SRAM Circuit Solutions 301
8.6 SEU in CMOS Logic Circuitry 302 8.7 Summary and Closing Comments 302
References 303 9 Latchup Circuit Solutions 305 9.1 Introduction 305 9.2
Power Supply Concepts 305 9.2.1 Power Supply Current Limit - Series
Resistor 305 9.2.2 Power Supply Current Limit - Current Source 306 9.2.3
Power Supply Solutions - Voltage Regulator 307 9.2.4 Latchup Circuit
Solutions - Power Supply Decoupling 308 9.3 Overshoot and Undershoot Clamp
Networks 311 9.3.1 Passive Clamp Networks 312 9.3.2 Active Clamp Networks
313 9.3.3 Dynamic Threshold Triple Well Passive and Active Clamp Networks
316 9.4 Passive and Active Guard Rings 318 9.4.1 Passive Guard Ring
Circuits and Structures 318 9.4.2 Active Guard Ring Circuits and Structures
319 9.5 Triple-Well Noise and Latchup Suppression Structures 326 9.6
System-Level Latchup Issues 326 9.7 Summary and Closing Comments 327
References 329 10 Emerging Effects and Future Technology 333 10.1
Introduction 333 10.2 Radiation Effects in Advanced Technologies 333 10.2.1
Moore's Law, Scaling, and Radiation Effects 334 10.2.2 Technology Lifetime
and Reliability 334 10.2.2.1 New Missions 335 10.2.2.2 Throwaway Mentality
335 10.2.2.3 New Space Entrants 335 10.2.3 Terrestrial Issues 335 10.2.4
Space Mission Issues 335 10.2.5 Server Farms 335 10.2.6 Automotive 336
10.2.7 Internet of Things (IoT) 336 10.2.8 More than Moore 336 10.3
Radiation Effects in Semiconductor Nanostructures 336 10.3.1 Planar MOSFETs
in Sub-25 nm 337 10.3.2 Bulk FinFET 338 10.3.3 SOI FinFET 339 10.3.4 3-D
Circuits 340 10.4 Radiation Effects and Advanced Packaging 340 10.4.1
Radiation Effects and 2.5-D Circuits and Technology 341 10.4.2 Radiation
Effects and 3-D Circuits and Technology 341 10.4.3 More than Moore and 3-D
Integration 342 10.5 Ruggedized Capability 342 10.5.1 Ruggedized Capability
for Radiation 343 10.5.2 Ruggedized Capability for High Temperature 343
10.6 Radiation Models 343 10.7 A Nuclear World 344 10.8 Summary and Closing
Comments 344 References 345 Index 347