TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings

Herausgegeben:The Minerals, Metals & Materials Society (TMS)

• Broschiertes Buch

Produktbeschreibung

This collection features papers presented at the 147th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Produktdetails

• The Minerals, Metals & Materials Series
• Verlag: Springer / Springer International Publishing / Springer, Berlin
• Artikelnr. des Verlages: 978-3-319-89187-3
• Softcover reprint of the original 1st ed. 2018
• Seitenzahl: 984
• Erscheinungstermin: 7. Juni 2019
• Englisch
• Abmessung: 235mm x 155mm x 53mm
• Gewicht: 1464g
• ISBN-13: 9783319891873
• ISBN-10: 3319891871
• Artikelnr.: 54883982

Autorenporträt

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents. 

Inhaltsangabe

Part 1. 2018 Symposium on Functional Nanomaterials: Discovery and Integration of Nanomaterials.- 2-D Nanosheets and Rod-like WO3 Obtained via Chemical Precipitation Method for Detecting Formaldehyde.- Electrochemical Fabrication of micro/nanoporous Copper Film by Electrosynthesis-dealloying of Cu-Zn Alloy in Eutectic Deep Solvent.- Electrosynthesis of CuNP'S from E-Waste.- Experimental Investigation of the Effect of ZnO-Citrus Sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid.- Obtaining of Iron Nanoparticles (Fe NP's) for Treatment of Water Contaminated with As.- Synthesis of Gold Nanoparticles Using the Extract of Sedum Praeltum and its Deposition on a Ceramic Substrate.- Part 2. Accident Tolerant Fuels for Light Water Reactor.- Effects of Ce Addition on the Microstructure and Mechanical Properties of Accident-tolerance Fe-Cr-Al Fuel Cladding Materials.- Part 3. Additive Manufacturing of Metals: Fatigue and Fracture.- Evaluation of The Mechanical Properties of 15Cr-5Ni Stainless Steel Produced by Direct Metal Laser Sintering.- Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced by Additive Manufacturing.- Part 4. Additive Manufacturing: Building the Pathway towards Process and Material Qualification.- Defect Detection in LENS AM Using In Situ Thermal Camera Process Monitoring.- Part 5. Advanced High-strength Steels.- Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5Mn-1.2C Austenitic Steel.- Non-metallic Inclusion and their Effect on Fatigue Strength for CAS-hardened Carbon Steel in Gears.- Influence of Austenitizing Temperature and Time on Microstructure and Mechanical Properties of an YP460 Grade Crack Arrest Steel.- The Evolution of Microstructure of an High Ni HSLA X100 Forged Steel Slab by Thermomechanical Controlled Processing.- Effects of Matrix Microstructure on the Nanoscale Precipitation and Precipitation Strengthening in an Ultra-high Strength Steel.- The Technology Study of Silicon Reduction of Chromite Powder in Microwave Field.- Part 6. Advanced Magnetic Materials for Energy and Power Conversion Applications.- Influence of Co-doping on the Crystal Structure, Magnetocaloric Properties and Elastic Moduli of the La(Fe,Si)13 Compound.- Part 7. Advanced Real Time Optical Imaging.- Mass Transfer in High-temperature Laser Confocal Microscopy.- Current State Art of Double Hot Thermocouple Technology-Novel Way for the Study of Mold Flux High-temperature Properties.- Part 8. Algorithm Development in Materials Science and Engineering.- A Dislocation-based Finite Element Modelling of Hydrogen Embrittlement in High-strength Steel Alloys.- Part 9. Biodegradable Materials for Medical Applications.- Comparative Study on Corrosion Behavior WE33 in Immersion and Polarization Influenced by Heat Treatment.- Metal Injection Molding (MIM) of Mg-alloys for Biomedical Applications.- Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant Materials.- Study on Polylactide-coconut Fibre for Biomedical Applications.- Visualisation of Implant Failure by Synchrotron Tomography.- Part 10. Biological Materials Science.- 3D Full-field Mechanical Measurement of Shoulder Bones under Implant Loading.- The Influence of Plastic Deformation Mechanisms on the Collagen Formation in Osteoblast Cells.- Part 11. Bulk Metallic Glasses XV.- Probabilistic Modelling and Simulation of Microstructural Evolution in Zr Based Bulk Metallic Glass Matrix Composites during Solidification.- Part 12. Computational Design and Simulation of Materials (CDSM 2018): Atomistic Simulations.- The Adhesion Force in Nano-contact during Approaching and Retrieving Processes.- Atomistic Simulations of Carbon Diffusion and Segregation in a-Iron Grain Boundaries.- Part 13. Computational Design and Simulation of Materials (CDSM 2018): Meso/Macroscale Simulations.- Microstructure Prediction for TMW-4M3 during Heat Treatment.- Study on the Effects of Contact Pressure and Process Parameters on the Casting-mold Interfacial Heat Transfer in Squeeze Casting.- Part 14. Computational Design and Simulation of Materials (CDSM 2018): Computational Design of Materials.- Study on the Effect of Applied Pressure on Directional Dendritic Growth by In-situ Observation.- Modeling of Solute-dependent Fluidity and Hot Tearing Sensitivity of Conductive Aluminum Alloys.- Coupling Void Coalescence Criteria in Finite Element Models: Application to Tensile Test.- Design of a New Multi-element Beta Titanium Alloy Based on D-electron Method.- Part 15. Computational Materials Science and Engineering for Nuclear Energy.- Effects of Oxygen on the Density of States and Elastic Properties of Hafnium-First Principles Calculations.- Morphological Study of Dispersion Phases in Heterogenous Waste Form Materials for Efficient Nuclear Waste Containment.- Part 16. Computational Thermodynamics and Kinetics.- Compare the Energies of Different Oxofuoraluminium Structures in Aluminium Production Process.- Manganese Influence on Equilibrium Partition Coefficient and Phase Transformation in Peritectic Steel.- Mathematical Modeling on the Fluid Flow and Desulfurization during KR Hot Metal Treatment.- Part 17. Coupling Experiments and Modeling to Understand Plasticity and Failure.- In-situ Characterization of Microstructural Damage in QP980 Steel.- Part 18. Deformation and Damage Mechanisms in High Temperature Ni, Co and Fe-based Superalloys.- Prediction of Incipient Melting Map and Features of Ni-base Superalloys Using Molecular Orbital Method.- Part 19. Dynamic Behavior of Materials VIII.- Mechanical Properties and Shear Localization of High Entropy Alloy CoCrFeMnNi Prepared by Powder Metallurgy.- Effect of Phase Transformation on High Temperature Dynamic Flow Stresses of CP-Ti.- Shock-induced Mechanical Response and Substructural Evolution of Ti-6Al-4V Alloy.- The Use of Circumferentially Notched Tension Specimen for Fracture Toughness Assessment of High Strength Steels.- A Low-Cost, Laboratory-Scale Method to Identify Regions of Microstructural Changes in Response to Dynamic Loading Conditions.- Part 20. Environmentally Assisted Cracking: Theory and Practice.- Environment Induced Degradation in Maraging Steel Grade 18Ni1750.- Part 21. Fatigue in Materials: Fundamentals, Multiscale Modeling and Prevention.- Thermal Fatigue Behavior of High Cr Roller Steel.- Influence of Cold Spray on the Enhancement of Corrosion Fatigue of the AZ31B Cast Mg Alloy.- Part 22. Fracture: 65 Years after the Weibull Distribution and the Williams Singularity.- High Temperature Cracking Damage of Calcium Aluminate Cements.- On the Experimental Evaluation of the Fracture Toughness of Shape Memory Alloys.- Part 23. Frontiers in Solidification Science and Engineering.- Inoculation in Lab Scale Low Alloyed Steel Castings.- Phase-field Modelling of Intermetallic Solidification.- Analysis of Formability of Glassy Alloys by Surface Heating under Convective Conditions.- Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel.- Part 24. General Poster Session.- Additive Manufacturing of Epoxy Resin Matrix Reinforced with Magnetic Particles.- Admixture Optimization in Concrete Using Superplasticizers.- Influence of Cold Spray on the Microstructure and Residual Stress of Resistance Spot Welded Steel-Mg.- Part 25. High Entropy Alloys VI.- Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy.- First-principles Calculations of Stacking Fault Energies in Quinary High-entropy Alloy Systems.- Synthesis of FeCrVNbMn High Entropy Alloy by Mechanical Alloying and Study of their Microstructure and Mechanical Properties.- Part 26. Integrative Materials Design III: Performance and Sustainability.- Magnesium Based Metal Matrix Nanocomposites - Processing and Properties.- Part 27. Materials and Fuels for the Current and Advanced Nuclear Reactors VII.- Investigation of Tin as a Fuel Additive to Control FCCI.- Part 28. Mechanical Behavior at the Nanoscale IV.- Mechanical Properties of Rapidly Solidified Ni₅Ge₃ Intermetallic.- Part 29. Mechanical Characteristics and Application Properties of Metals and Non-metals for Technology: An EPD Symposium in Honor of Donato Firrao.- Production of Cu2O Powder Using Electrodeposition Method.- Alumina Feeding System Changes in Aluminum Electrochemical Cell with D18 Technology for Energy Efficiency (Case Study: Almahdi- Hormozal Aluminum Smelter).- Hot Ductility of X70 Pipeline Steel in Continuous Casting.- Ductile Fracture Assessment of Hot Isostatically Pressed Stainless Steel Using 3D X-ray Computed Tomography.- Thermo-Calc of the Phase Diagrams of the Nb-N System.- Part 30. Multi-material Additive Manufacturing: Processing and Materials Design.- Development of Novel Squeeze Cast High Tensile Strength Al-Si-Cu-Ni-Sr Alloys.- Part 31. Nanocomposites V: Structure-PropertyRelationships in Nanostructured Materials.- Carbon Nanocomposite for Reliable Seal Applications in High- temperature, High-pressure, Corrosive Environments.- The Dielectric Behavior in Reduced Graphene Oxide /Polymer Composites with a Segregated Structure.- Part 32. Phase Transformations and Microstructural Evolution.- Solid State Phase Transformation Mechanism in High Carbon Steel under Compressive Load and with Varying Cr Percent.- Microstructure Characterization of Aged Heat Resistant Steels.- Sublimation and Self Freezing of Planar Surfaces in Rarefied Atmospheres.- Effect of Precipitation on Creep Properties of Ferritic Steels.- Microstructural Evolution of a New Beta Titanium Alloy during the Beta Annealing, Slow Cooling and Aging Process.- Part 33. Powder Metallurgy of Light, Reactive and Other Non-ferrous Metals.- A Review of the Preparation Methods of WC Powders.- Influence of Hot Rolling on Mechanical Behavior and Strengthening Mechanism in Boron Carbide Reinforced Aluminum Matrix Composites.- Preparation of Titanium Foams with Uniform and Fine Pore Characteristics through Powder Metallurgy Route Using Urea Particles as Space Holder.- Leaching Characteristics of Non Ferrous Metals Recovery from Korean Municipal Solid Waste Incineration Bottom Ash Samples.- Part 34. Surface Engineering for Improved Corrosion Resistance.- Anti-corrosion Properties of Rosemary Oil and Vanillin on low carbon steel in Dilute Acid Solutions.- Stainless Steel Corrosion Resistance in 0.5 M H2SO4 Using Cassia Fistula Extract.- Synergistic Effect of Benzonitrile and Benzothiazole on the Corrosion Inhibition of 316 Stainless Steel in 6M HCl Solution.- Corrosion Resistance of Aluminium in 0.5 M H2SO4 in the Presence of Cassia Fistula Extract.- Part 35. Surface Interactions in Materials.- Pt Decorating Effect on CNT Surface towards Adsorption of SF6 Decomposed Components.- Part 36. Thermo-mechanical Response of Materials with Special Emphasis on In-situ Techniques.- "In Situ" Measurement of Electrical Resistivity, Dilatometry and Thermal Analyses of Cast Iron.- Part 37. Ultrafine-grained Materials X.- Mechanical Properties of Ultrafine Grained 2519 Aluminum Alloy.