George Halmos (ed.)

Roll Forming Handbook

Herausgeber: Halmos, George T

• Gebundenes Buch

Produktbeschreibung

Over 35 percent of all light gauge steel produced in North America is processed through roll forming lines, and nearly all ductile sheet metals with a thickness between .004" and .75" can also be roll formed. The Roll Forming Handbook is the first comprehensive guide to all aspects of the roll forming process, from conception to practical know-how. Under the guidance of George Halmos, expert contributors share insights based on many years of hard-won experience and provide information on roll forming mills, uncoilers, presses, die accelerators, and other equipment. Supplementing this information are discussions on roll design, setup, troubleshooting, materials to be formed, and lubrication.

Produktdetails

• Verlag: CRC Press
• Seitenzahl: 582
• Erscheinungstermin: 29. November 2005
• Englisch
• Abmessung: 261mm x 178mm x 31mm
• Gewicht: 1161g
• ISBN-13: 9780824795634
• ISBN-10: 0824795636
• Artikelnr.: 21887548

Autorenporträt

George T. Halmos

Inhaltsangabe

Introduction to Roll Forming. Roll Forming Mill. Presses and Die Accelerators. Secondary Operations in the Roll Forming Line. Roll Design. Materials. Lubrication. Coil Processing
Material Handling
and Plant Layout. Designing Products for Roll Forming. Equipment Installation
Roll Setup
Maintenance
and Troubleshooting. Behavior of Metal Strip during Roll Forming. Acquiring Roll Forming Lines
Education
and Training. Safety. Increasing Efficiency of Roll Forming Lines and Case Studies. Unusual
New
and Future Roll Forming Technologies. Appendices. References. Index.