Proceedings of the Scientific-Practical Conference "Research and Development - 2016"

Herausgegeben:Anisimov, K. V.; Dub, A. V.; Kolpakov, S. K.; Lisitsa, A. V.; Petrov, A. N.; Polukarov, V. P.; Popel, O. S.; Vinokurov, V. A.

• Gebundenes Buch

Produktbeschreibung

This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme "Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014-2020." It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.

Produktdetails

• Verlag: National Training Foundation / Springer / Springer International Publishing / Springer, Berlin
• Artikelnr. des Verlages: 978-3-319-62869-1
• 1st ed. 2018
• Seitenzahl: 748
• Erscheinungstermin: 5. Dezember 2017
• Englisch
• Abmessung: 241mm x 160mm x 46mm
• Gewicht: 1262g
• ISBN-13: 9783319628691
• ISBN-10: 3319628690
• Artikelnr.: 48539209

Inhaltsangabe

Book One: Computer Science and Transport

Multimodal control system of active lower limb exoskeleton with feedback.- Investigation and development of methods for improving robustness of automatic speech recognition algorithms in complex acoustic environments.- Smart Endoscope: Firmware Complex for Real-Time Analysis and Recognition of Endoscopic Videos.- Development of Constructive-Technological Decisions On Creation of a Family of Microelectronic Elements On The «Silicon On Insulator» (SOI) Structures- Thermopile IR sensor arrays.- Development signal processing integrated circuit for position sensors with high resolution.- Brain controlled biometric signals employed to operate external technical devices.- Improving Talent Management with Automated Competence Assessment: Research Summary.- Educational Potential of Quantum Cryptography and Its Experimental Modular Realization.- Interactive Visualization of Non-formalized Data Extracted from News Feeds: Approaches and Perspectives.- Development of Pulsed Solid-State Generators of Millimeter and Submillimeter Wavelengths Based on Multilayer GaAs/AlGaAs Heterostructures.- Asymmetric Magnetoimpedance in Bimagnetic Multilayered Film Structures.- The Model of the Cybernetic Network and its realization on the Cluster of Universal and Graphic processors.- Development of a multifunctional all-terrain vehicle for energy efficiency and improved fuel economy.- Influence of AlGaN barrier layer thickness on the GaN HEMT parameters for space applications.- Development and Implementation of an Integrated Approach to Improving the Operating Cycle and Design of an Energy-Efficient Forced Diesel Engine.- Application of volume-surface hardening by high-speed water flow for improving static and cyclic strength of large-scale castings from low carbon steel.- Development of new universal collective survival craft for evacuation in emergency situations on the Arctic shelf.- Development of active safety software of road freight transport.- Analysis of the stress state in steel components using portable X-ray diffraction.- High-speed laser direct deposition technology: theoretical aspects, experimental researches, analysis of structure and properties of metallic products.- The VLSI high-level synthesis for building onboard spacecraft control systems.- Synthesis and properties of energetics metal borides for hybrid solid-propellant rocket engines.- A Concept of Robotic System with Force-Controlled Manipulators for On-Orbit Servicing Spacecraft.- Development of microlinear piezo-drives for spacecraft actuators.- Mechanical treatment of ZrB2-SiC powders and sintered ceramic composites properties.- Natural gas fueled rocket detonation engine.- Design of dynamic scale model of long endurance unmanned aerial vehicle.- Features of the development of regional transport models.

Book Two: Nanoscience & Nanotechnology; Energy and Energy Efficiency

Advanced heat-resistant TiAl(Nb,Cr,Zr) based intermetallics with the stabilized beta(Ti)-phase.- Structural and magnetic properties of as-cast Fe-Nd alloys.- Laser technology of designing nanocomposite implants of the knee ligaments.- Properties of Structural Steels with Nanoscale Substructure.- Near-net shapes Al2O3-SiCw ceramic nanocomposites produced by Hybrid Spark Plasma Sintering.- Development of technical and technological solutions in the field of multilayer graphene for creating electrode nanomaterial energy storage devices.- Carbon fiber-reinforced polyurethane composites with modified carbon-polymer interface.- Development and research of multi-frequency x-ray tube with a field nanocathode.- Quasicrystalline powders as the fillers for polymers based composites: production, introduction to polymer matrix, properties.- Selection of Aluminum Matrix for Boron-Aluminum Sheet Alloys.- Features of Carbide Precipitation During Tempering of 15H2NMFA and 26HN3M2FA Steels.- Improvement of the mechanical and biomedical properties of implants via the production of nanocomposite based on nanostructured titanium matrix and bioactive nanocoating.- Nanopowders Synthesis of Oxygen-Free Titanium Compounds - Nitride, Carbonitride and Carbide in a Plasma Reactor.- The Technology and Setup for High- throughput Synthesis of Endohedral Metal Fullerenes.- On Some Features of Nanostructural Modification of Polymer-Inorganic Composite Materials for Light Industry and for Building Industry.- On creation of highly efficient micro-hydraulic power plants of pontoon modular design in conditions of super-low flow parameters.- The mixture of fatty acids conversion into hydrocarbons over original Pt-Sn/Al2O3 catalyst.- Development of Scientific and Technical Solutions to Create Hybrid Power Source Based on Solid Oxide Fuel Cells and Power Storage System for Responsible Consumers.- Beneficiation of heat-treated crushed brown coal for energy production and Utilities.- Automated Control Unit of Power Flow in Intellectual Electricity Distribution Network.- NiMo/USY-Alumina Catalysts with Different Zeolite Content for Vacuum Gas Oil Hydrocracking over Stacked Beds.- Comparative mechanical tests of samples obtained by the domestic experimental unit MELTMASTER3D-550.- Development of lithium-ion battery of the "doped lithium iron phosphate-doped lithium titanate" system for power applications.- Development of Technological Process of Matrix Conversion of Natural and Associated Petroleum Gases into Syngas with Low Content of Nitrogen.- The partial replacement of diesel fuel in hot water boiler with syngas obtained by thermal conversion of wood waste.- The Experimental Research on Independent Starting and Autonomous Operation of HDTB Considered as a Basic Block of AES Based on Supercritical Hydrothermal Destruction.

Book Three: Life Sciences and Ecology & Environment Sciences

The influence of DCs loaded with tumor antigens on the cytotoxic response of MNC culture patients with oncology.- Establishment of a Technological Platform for Pre-Clinical Evaluation of Biomedical Cellular Products in Russia.- Combination of functional electrical stimulation and noninvasive spinal cord electrical stimulation for movement rehabilitation of the children with cerebral palsy.- Bifunctional recombinant protein agent based on Pseudomonas exotoxin A fragment for targeted therapy of HER2-positive tumors.- Development of classification rules for a screening diagnostics of lung cancer patients based on the spectral analysis of metabolic profiles in the exhaled air.- Antitumor Effect of Vaccinia Virus Double Recombinant Strains Expressing Genes of Cytokine GM-CSF and Oncotoxic Peptide Lactaptin.- Genome wide association studies for milk production traits in Russian population of Holstein and Black and White cattle.- Development of the first Russian anammox-based technology for nitrogen removal from wastewater.- Overview of 17 856 compound screening for translation inhibition and DNA damage in bacteria.- Shape of the voltage-frequency curve depending on the type of the object detached from the QCM surface.- On creation of highly efficient micro-hydraulic power plants of pontoon modular design in conditions of super-low flow parameters.- The mixture of fatty acids conversion into hydrocarbons over original Pt-Sn/Al2O3 catalyst.- Development of Scientific and Technical Solutions to Create Hybrid Power Source Based on Solid Oxide Fuel Cells and Power Storage System for Responsible Consumers.- Beneficiation of heat-treated crushed brown coal for energy production and Utilities.- Automated Control Unit of Power Flow in Intellectual Electricity Distribution Network.- NiMo/USY-Alumina Catalysts with Different Zeolite Content for Vacuum Gas Oil Hydrocracking over Stacked Beds.- Comparative mechanical tests of samples obtained by the domestic experimental unit MELTMASTER3D-550.- Development of lithium-ion battery of the "doped lithium iron phosphate-doped lithium titanate" system for power applications.- Development of Technological Process of Matrix Conversion of Natural and Associated Petroleum Gases into Syngas with Low Content of Nitrogen.- The partial replacement of diesel fuel in hot water boiler with syngas obtained by thermal conversion of wood waste.- The Experimental Research on Independent Starting and Autonomous Operation of HDTB Considered as a Basic Block of AES Based on Supercritical Hydrothermal Destruction.