Sanjay Mathur, Tatsuki Ohji

Mechanical Properties and Performance of Engineering Ceramics and Composites V, Volume 31, Issue 2

Herausgegeben von Singh, Dileep; Salem, Jonathan

• Gebundenes Buch

Produktbeschreibung

This volume is a compilation of papers presented in the Mechanical Behavior and Performance of Ceramics & Composites symposium during the 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC) held January 24-29, 2010, in Daytona Beach, Florida.

The Mechanical Behavior and Performance of Ceramics & Composites symposium was one of the largest symposia in terms of the number (100) of presentations at the ICACC'10. This symposium covered wide ranging and cutting-edge topics on mechanical properties and reliability of ceramics and composites and their correlations to processing, microstructure, and environmental effects. Symposium topics included:

Ceramics and composites for engine applications
Design and life prediction methodologies
Environmental effects on mechanical properties
Mechanical behavior of porous ceramics
Ultra high temperature ceramics
Ternary compounds
Mechanics & characterization of nanomaterials and devices
Novel test methods and equipment
Processing - microstructure - mechanical properties correlations
Ceramics & composites joining and testing
NDE of ceramic components

Produktdetails

• Ceramic Engineering and Science Proceedings Vol.31/2
• Verlag: Wiley & Sons
• 1. Auflage
• Seitenzahl: 386
• Erscheinungstermin: 12. Oktober 2010
• Englisch
• Abmessung: 236mm x 157mm x 30mm
• Gewicht: 798g
• ISBN-13: 9780470594674
• ISBN-10: 0470594675
• Artikelnr.: 30206066

Autorenporträt

Dileep Singh, Argonne National Laboratory. Jonathan Salem, NASA Glenn Research Center.

Inhaltsangabe

Preface. Introduction. PROCESSING. The Effects of Heating Rate on Magnesia Doped Alumina Prepared bySPS (B. Apak
G. Goller
F. C. Sahin
and O. Yucel). Effect of Coke Calcination Temperature on the Processing of Reaction Bonded Silicon Carbide (Rodrigo P. Silva
Claudio V. Rocha
Marysilvia F. Costa
and Celio A. Costa). Pressureless Sintering of Mullite-Ceria-Doped Zirconia-Silicon Carbide Composites (Barry A. Bender
Michael Vick
and Ming-Jen Pan The Role of Carbon in Processing Hot Pressed Aluminium Nitride Doped Silicon Carbide (N. Ur-rehman
P. Brown
and L. J. Vandeperre). CHARACTERIZATION. Microstructure and High-Temperature Properties of Si-B-C-N MA-Powders and Ceramic (Yu Zhou
Zhi-Hua Yang
De-Chang Jia
and Xiao-Ming Duan). Influence of Water Quality on Corrosion of Multi-Oxide Engineering Ceramics (Marju Mannila and Antti Häkkinen). The Effect of Load and Temperature on Hardness of ZrB2 Composites (J. Wang
F. Giuliani
and L. J. Vandeperre). Nano-lndentation Hardness Measurements as a Characterization Technique of SiC and Pyrolytic Carbon Layers of Experimental PBMR Coated Particles (I. J. van Rooyen
E. Nquma
J. Mahlangu
and J. H. Neethling). High Temperature Mechanical Loss of Nanostructured Yttria Stabilized Zirconia (3Y-TZP) Reinforced with Carbon Nanotubes (Mehdi Mazaheri
Daniele Mari
Robert Schaller
and Zhijian Shen). The Influence of Nanosize Carbon Concentration on Mechanical Properties of RBSIC (Cristiane Evelise Ribeiro da Silva
Rosa Trejo
Sanghoon Shim
Edgar Lara-Curzio
and Celio A. Costa). Si/SiC and Diamond Composites: Microstructure-Mechanical Properties Correlation (S. Salamone
R. Neill
and M. Aghajanian). Mechanical Properties and Failure Criterion of Silicon-Based Joints (L. M. Nguyen
O. Gillia
Emmanuelle Rivière
and Dominique Leguillon). Effect of Various SnAgTi-Alloys and Laser Induced Texturing on the Shear Strength of Laser Brazed SiC-Steel-Joints (I. Südmeyer
M. Rohde
T. Fürst). Characterization of Poled Single-Layer PZT for Piezo Stack in Fuel Injection System (Hong Wang
Tadashi Matsunaga
and Hua-Tay Lin). Thermal Tomographie Imaging for Nondestructive Evaluation of Ceramic Composite Materials (J. G. Sun). A More Comprehensive NDE: PCRT for Ceramic Components (Leanne Jauriqui and Lem Hunter). FIBER REINFORCED COMPOSITES. Microstructure and Thermodynamic Descriptions of SiC-Based Ceramic Fibers (Géraldine Puyoo
Georges Chollon
René Pailler
and Francis Teyssandier). Static Fatigue of Multifilament Tows at High Temperatures above 900°C (A. Laforèt and J. Lamon). 3D Multiscale Modeling of the Mechanical Behavior of Woven Composite Materials (G. Couégnat
E. Martin
and J. Lamon). Mode I Interlaminar Fracture Toughness Testing of a Ceramic Matrix Composite (G. Ojard
T. Barnett
M. Dahlen
U. Santhosh
J. Ahmad
and R. Miller). Comparative Study of Tensile Properties of Uni-Directional Single-Tow SiC-Matrix Composites Reinforced with Various Near-Stoichiometric SiC Fibers (Kazumi Ozawa
Yutai Katoh
Edgar Lara-Curzio
Lance L. Snead
and Takashi Nozawa). Foreign Object Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite (Sung R. Choi
David C. Faucett
and Donald J. Alexander). Static Contact Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite with Reference to Foreign Object Damage (David C. Faucett
Donald J. Alexander
Sung R. Choi). Effects of Environment on Creep Behavior of NEXTEL720 / Alumina-Mullite Ceramic Composite with ±45° Fiber Orientation at1200°C (M. Ozer and M. B. Ruggles-Wrenn). Fatigue Behavior of an Oxide/Oxide CMC under Combustion Environment (Shankar Mall and Andrew R. Nye). EROSION AND WEAR. Particle Erosion Wear Behavior of New Conceptual SiC/SiC Composites (Min-Soo Sun
Tatsuya Hinoki
and Akira Kohyama). Threshold of Ring Crack Initiation on CVD-SiC under Particle Impact (Min-Soo Suh
Sang-Yeob Oh
Tatsuya Hinoki
Chang-Min Suh
and Akira Kohyama). Advanced Ceramic-Steel Pairings under Permanent Slip for Dry Running Clutch Systems (Albert Albers and Michael Meid). Development and Validation of Lubricated Multi-Disk Clutch Systems with Advanced Ceramics (Albert Albers
Johannes Bernhardt
and Sascha Ott). MODELING. Virtual Testing and Simulation of Multiple Cracking in Transverse (Tows of Woven CMCs (Pierre Pineau
Guillaume Couégnat
and Jacques Lamon). Isothermal ChemÌcal Vapor Infiltration Modeling by Random Walks in CMT 3D Images at Two Scales (G. L. Vignoles
I. Szelengowicz
W. Ros
C. Mulat
and C. Germain). Adsorption and Surface Diffusion of Oxygen on 3C and 2H-SIC Polytypes: Numerical Studies (Junjie Wang
Litong Zhang
Qinfeng Zeng
and G. L. Vignoles). Effective Surface Recession Laws for the Physico-Chemical Ablation of C/C Composite Materials (G. L. Vignoles
J. Lachaud
Y. Aspa
and M. Quintard). Model of the Influence of Damage on the Thermal Properties of Ceramic Matrix Composites (Jalal El Yagoubi
Jacques Lamon
and Jean-Christophe Batsale). Author Index.