Charlie Cullen

Learn Audio Electronics with Arduino (eBook, ePUB)

Practical Audio Circuits with Arduino Control

• Format: ePub

Produktbeschreibung

Learn Audio Electronics with Arduino: Practical Audio Circuits with Arduino Control teaches the reader how to use Arduino to control analogue audio circuits and introduces electronic circuit theory through a series of practical projects, including a MIDI drum controller and an Arduino-controlled two-band audio equalizer amplifier.

---

Dieser Download kann aus rechtlichen Gründen nur mit Rechnungsadresse in A, B, BG, CY, CZ, D, DK, EW, E, FIN, F, GR, HR, H, IRL, I, LT, L, LR, M, NL, PL, P, R, S, SLO, SK ausgeliefert werden.

---

Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.

Produktdetails

• Verlag: Taylor & Francis eBooks
• Seitenzahl: 486
• Erscheinungstermin: 26. März 2020
• Englisch
• ISBN-13: 9780429588884
• Artikelnr.: 58931221

Autorenporträt

Charlie Cullen is Assistant Head of the School of Electrical & Electronic Engineering in the Technological University Dublin, Ireland.

Inhaltsangabe

INTRODUCTION
SOFTWARE TOOLS
Tinkercad
LTSpice
Arduino IDE
EQUIPMENT
Arduino Uno
Breadboard
Switches & LEDs
Resistors, Capacitors & Potentiometers
Audio & MIDI Components
Other Components
Soldering
Final Component List
CONCLUSIONS
1 ELECTRONICS FUNDAMENTALS
1.1 SCALES, SYMBOLS & EQUATIONS
1.1.1 Worked Example- Adding Voltages
1.1.2 Worked Example- Working with Fractions
1.2 ELECTRICAL FUNDAMENTALS
1.3 TUTORIAL- INTRODUCTION TO TINKERCAD
1.4 EXAMPLE PROJECT- GETTING STARTED: AN ARDUINO POWERED LED LIGHT
1.5 CONCLUSIONS
1.6 SELF- STUDY QUESTIONS
2 SYSTEMS & TRANSDUCERS
2.1 ELECTRONIC SYSTEMS & TRANSDUCERS
2.2 DIGITAL SYSTEMS & ARDUINO CONTROL
2.3 ANALOGUE TO DIGITAL CONVERSION- SAMPLING
2.4 MIDI CONTROL SYSTEMS
2.5 AUDIO SENSORS: SWITCHES, POTENTIOMETERS & MICROPHONES
2.6 AUDIO ACTUATORS: LED'S & LOUDSPEAKERS
2.7 TUTORIAL- WORKING WITH COMPONENTS
2.8 EXAMPLE PROJECT- SENSOR CONTROL OF LED OUTPUT
2.8.1 Circuit Design
2.9 CONCLUSIONS
2.10 SELF- STUDY QUESTIONS
3 DC CIRCUITS
3.1 OHM'S LAW & DIRECT CURRENT
3.1.1 Worked Example- Calculating A Resistor Value
3.2 KIRCHOFF'S VOLTAGE LAW: SERIES CIRCUITS
3.2.1 Worked Examples- Calculating Series Resistance
3.2.2 Worked Example- Calculating Series Resistor Voltages
3.3 VOLTAGE DIVIDERS
3.3.1 Worked Examples- Voltage Dividers
3.4 KIRCHOFF'S CURRENT LAW: PARALLEL CIRCUITS
3.4.1 Worked Examples-- Calculating Parallel Resistance
3.4.2 Worked Examples- Calculating Parallel Current
3.5 TUTORIAL: LIMITING CURRENT TO PROTECT COMPONENTS
3.6 EXAMPLE PROJECTS: SERIES & PARALLEL CIRCUITS
3.6.1 Series Circuit Project
3.6.2 Parallel Circuit Project
3.7 CONCLUSIONS
3.8 SELF-STUDY QUESTIONS
4 DIGITAL SYSTEMS 1- ARDUINO OUTPUT
4.1 MICROPROCESSOR CONTROL SYSTEMS
4.2 INSTRUCTION TYPES- SEQUENCE INSTRUCTIONS
4.3 EXAMPLE PROJECT 1- ARDUINO DIGITAL OUTPUT
4.4 DATA TYPES- VARIABLES
4.5 EXAMPLE 2- MULTIPLE DIGITAL OUTPUTS
4.6 FUNCTIONS- ENCAPSULATING CODE
4.7 TUTORIAL- HOW TO WRITE CODE PART 1
4.8 EXAMPLE 3- REUSING CODE WITH FUNCTIONS
4.9 ANALOGUE OUTPUT- PULSE WIDTH MODULATION
4.10 EXAMPLE PROJECT- AUTOMATIC TONE PLAYER
4.11 CONCLUSIONS
4.12 SELF- STUDY QUESTIONS
5 DIGITAL SYSTEMS 2- ARDUINO INPUT
5.1 PROGRAMMING RECAP
5.2 DATA STRUCTURES & ITERATION- ARRAYS & LOOPS
5.3 EXAMPLE 1- TONE ARRAY OUTPUT
5.4 WORKING WITH EXTERNAL LIBRARIES- SERIAL MIDI OUTPUT
5.5 EXAMPLE 2- MIDI SEQUENCE PLAYER
5.6 CONDITIONS & DIGITAL INPUT
5.7 TUTORIAL- HOW TO WRITE CODE PART II
5.8 EXAMPLE 3- MIDI SWITCH CONTROLLER OUTPUT
5.9 ANALOGUE INPUT- PERCUSSION SAMPLING
5.10 FINAL PROJECT: MIDI DRUM TRIGGER
5.11 CONCLUSIONS
5.12 SELF- STUDY QUESTIONS
6 AC CIRCUITS
6.1 AUDIO SIGNAL FUNDAMENTALS- SINE WAVES
6.1.1 Worked Example- Varying the Speed of Sound
6.2 AC SIGNALS- AMPLITUDE, FREQUENCY & PHASE
6.2.1 Worked Examples- Finding the Instantaneous Voltage of a Sine Wave
Input Signal
6.3 CAPACITANCE- STORING CHARGE OVER TIME
6.3.1 Worked Example- Calculating the Charge on a Capacitor
6.3.2 Worked Example- Calculating Capacitive Reactance for Different Input
Frequencies
6.4 IMPEDANCE- COMBINING AC COMPONENTS
6.4.1 Worked Examples- Analysing Combined Resistive and Reactive Circuits
6.5 TUTORIAL: INSTALLING LTSPICE
6.6 EXAMPLE PROJECT- AC ANALYSIS WITH LTSPICE
6.6.1 Example Project- Circuit 1
6.6.2 Example Project- Circuit 2
6.7 CONCLUSIONS
6.8 SELF-STUDY QUESTIONS
7 AUDIO AMPLIFIERS
7.1 AMPLIFICATION
7.1.1 Worked Examples- Calculating Decibel Gain Values
7.2 SEMICONDUCTORS- DIODES
7.3 SEMICONDUCTORS: TRANSISTORS
7.3.1 Worked Example- Simulating BJT Characteristic Curves Using LTspice
7.3.2 Worked Example- Simulating A Common Emitter Amplifier With LTspice
7.4 OPERATIONAL AMPLIFIERS
7.4.1 Worked Example- Simulating an Inverting Amplifier With LTspice
7.5 DC BLOCKING, POWER DECOUPLING & ZOBEL NETWORKS
7.6 EXAMPLE PROJECT: BUILDING AN AUDIO AMPLIFIER
7.7 CONCLUSIONS
7.8 SELF-STUDY QUESTIONS
8 AUDIO FILTERS
8.1 DECIBELS & EQUAL LOUDNESS
8.2 FILTER CHARACTERISTICS & BODE PLOTS
8.3 1ST ORDER LOW PASS FILTER
8.3.1 Worked Example- Designing a 1st Order Low Pass Filter
8.3.2 Worked Example- Simulating a 1st Order Low Pass Filter Using LTspice
8.4 1ST ORDER HIGH PASS FILTER
8.4.1 Worked Example- Designing a 1st Order High Pass Filter
8.4.2 Worked Example- Simulating a 1st Order High Pass Filter with LTspice
8.4.3 Worked Example- Reading & Writing Audio Files with LTspice
8.5 CONTROLLING AUDIO FILTERS
8.6 EXAMPLE PROJECT- AUDIO AMPLIFIER WITH 2-BAND EQUALIZER
8.7 CONCLUSIONS
8.8 SELF-STUDY QUESTIONS
9 ARDUINO AUDIO CONTROL
9.1 FINAL PROJECT OVERVIEW
9.1.1 Project Components
9.2 ARDUINO STATE CONTROL
9.2.1 Worked Example- Arduino State Control
9.3 ARDUINO DIGITAL FILTER CONTROL
9.4 FINAL PROJECT- ARDUINO CONTROLLED AUDIO AMPLIFIER WITH 2-BAND EQUALIZER
9.5 CONCLUSIONS
10 CONCLUSIONS
10.1 FUTURE WORK
10.1.1 Electronics Fundamentals
10.1.2 Arduino Control
10.1.3 Audio Electronics
10.2 FINAL NOTES
APPENDIX 1: SELF-STUDY QUESTIONS
APPENDIX 2: AC DERIVATIONS (CHAPTER 6)
Deriving Charge Over Time
Deriving an RC Time Constant
Deriving Capacitor Voltage
Deriving Capacitive Reactance
Deriving Series Impedance Magnitude
Deriving Series Capacitance
Deriving Parallel Capacitance
APPENDIX 3: RESISTOR VALUES

---

INTRODUCTION

SOFTWARE TOOLS

Tinkercad

LTSpice

Arduino IDE

EQUIPMENT

Arduino Uno

Breadboard

Switches & LEDs

Resistors, Capacitors & Potentiometers

Audio & MIDI Components

Other Components

Soldering

Final Component List

CONCLUSIONS

1 ELECTRONICS FUNDAMENTALS

1.1 SCALES, SYMBOLS & EQUATIONS

1.1.1 Worked Example- Adding Voltages

1.1.2 Worked Example- Working with Fractions

1.2 ELECTRICAL FUNDAMENTALS

1.3 TUTORIAL- INTRODUCTION TO TINKERCAD

1.4 EXAMPLE PROJECT- GETTING STARTED: AN ARDUINO POWERED LED LIGHT

1.5 CONCLUSIONS

1.6 SELF- STUDY QUESTIONS

2 SYSTEMS & TRANSDUCERS

2.1 ELECTRONIC SYSTEMS & TRANSDUCERS

2.2 DIGITAL SYSTEMS & ARDUINO CONTROL

2.3 ANALOGUE TO DIGITAL CONVERSION- SAMPLING

2.4 MIDI CONTROL SYSTEMS

2.5 AUDIO SENSORS: SWITCHES, POTENTIOMETERS & MICROPHONES

2.6 AUDIO ACTUATORS: LED'S & LOUDSPEAKERS

2.7 TUTORIAL- WORKING WITH COMPONENTS

2.8 EXAMPLE PROJECT- SENSOR CONTROL OF LED OUTPUT

2.8.1 Circuit Design

2.9 CONCLUSIONS

2.10 SELF- STUDY QUESTIONS

3 DC CIRCUITS

3.1 OHM'S LAW & DIRECT CURRENT

3.1.1 Worked Example- Calculating A Resistor Value

3.2 KIRCHOFF'S VOLTAGE LAW: SERIES CIRCUITS

3.2.1 Worked Examples- Calculating Series Resistance

3.2.2 Worked Example- Calculating Series Resistor Voltages

3.3 VOLTAGE DIVIDERS

3.3.1 Worked Examples- Voltage Dividers

3.4 KIRCHOFF'S CURRENT LAW: PARALLEL CIRCUITS

3.4.1 Worked Examples-- Calculating Parallel Resistance

3.4.2 Worked Examples- Calculating Parallel Current

3.5 TUTORIAL: LIMITING CURRENT TO PROTECT COMPONENTS

3.6 EXAMPLE PROJECTS: SERIES & PARALLEL CIRCUITS

3.6.1 Series Circuit Project

3.6.2 Parallel Circuit Project

3.7 CONCLUSIONS

3.8 SELF-STUDY QUESTIONS

4 DIGITAL SYSTEMS 1- ARDUINO OUTPUT

4.1 MICROPROCESSOR CONTROL SYSTEMS

4.2 INSTRUCTION TYPES- SEQUENCE INSTRUCTIONS

4.3 EXAMPLE PROJECT 1- ARDUINO DIGITAL OUTPUT

4.4 DATA TYPES- VARIABLES

4.5 EXAMPLE 2- MULTIPLE DIGITAL OUTPUTS

4.6 FUNCTIONS- ENCAPSULATING CODE

4.7 TUTORIAL- HOW TO WRITE CODE PART 1

4.8 EXAMPLE 3- REUSING CODE WITH FUNCTIONS

4.9 ANALOGUE OUTPUT- PULSE WIDTH MODULATION

4.10 EXAMPLE PROJECT- AUTOMATIC TONE PLAYER

4.11 CONCLUSIONS

4.12 SELF- STUDY QUESTIONS

5 DIGITAL SYSTEMS 2- ARDUINO INPUT

5.1 PROGRAMMING RECAP

5.2 DATA STRUCTURES & ITERATION- ARRAYS & LOOPS

5.3 EXAMPLE 1- TONE ARRAY OUTPUT

5.4 WORKING WITH EXTERNAL LIBRARIES- SERIAL MIDI OUTPUT

5.5 EXAMPLE 2- MIDI SEQUENCE PLAYER

5.6 CONDITIONS & DIGITAL INPUT

5.7 TUTORIAL- HOW TO WRITE CODE PART II

5.8 EXAMPLE 3- MIDI SWITCH CONTROLLER OUTPUT

5.9 ANALOGUE INPUT- PERCUSSION SAMPLING

5.10 FINAL PROJECT: MIDI DRUM TRIGGER

5.11 CONCLUSIONS

5.12 SELF- STUDY QUESTIONS

6 AC CIRCUITS

6.1 AUDIO SIGNAL FUNDAMENTALS- SINE WAVES

6.1.1 Worked Example- Varying the Speed of Sound

6.2 AC SIGNALS- AMPLITUDE, FREQUENCY & PHASE

6.2.1 Worked Examples- Finding the Instantaneous Voltage of a Sine Wave Input Signal

6.3 CAPACITANCE- STORING CHARGE OVER TIME

6.3.1 Worked Example- Calculating the Charge on a Capacitor

6.3.2 Worked Example- Calculating Capacitive Reactance for Different Input Frequencies

6.4 IMPEDANCE- COMBINING AC COMPONENTS

6.4.1 Worked Examples- Analysing Combined Resistive and Reactive Circuits

6.5 TUTORIAL: INSTALLING LTSPICE

6.6 EXAMPLE PROJECT- AC ANALYSIS WITH LTSPICE

6.6.1 Example Project- Circuit 1

6.6.2 Example Project- Circuit 2

6.7 CONCLUSIONS

6.8 SELF-STUDY QUESTIONS

7 AUDIO AMPLIFIERS

7.1 AMPLIFICATION

7.1.1 Worked Examples- Calculating Decibel Gain Values

7.2 SEMICONDUCTORS- DIODES

7.3 SEMICONDUCTORS: TRANSISTORS

7.3.1 Worked Example- Simulating BJT Characteristic Curves Using LTspice

7.3.2 Worked Example- Simulating A Common Emitter Amplifier With LTspice

7.4 OPERATIONAL AMPLIFIERS

7.4.1 Worked Example- Simulating an Inverting Amplifier With LTspice

7.5 DC BLOCKING, POWER DECOUPLING & ZOBEL NETWORKS

7.6 EXAMPLE PROJECT: BUILDING AN AUDIO AMPLIFIER

7.7 CONCLUSIONS

7.8 SELF-STUDY QUESTIONS

8 AUDIO FILTERS

8.1 DECIBELS & EQUAL LOUDNESS

8.2 FILTER CHARACTERISTICS & BODE PLOTS

8.3 1ST ORDER LOW PASS FILTER

8.3.1 Worked Example- Designing a 1st Order Low Pass Filter

8.3.2 Worked Example- Simulating a 1st Order Low Pass Filter Using LTspice

8.4 1ST ORDER HIGH PASS FILTER

8.4.1 Worked Example- Designing a 1st Order High Pass Filter

8.4.2 Worked Example- Simulating a 1st Order High Pass Filter with LTspice

8.4.3 Worked Example- Reading & Writing Audio Files with LTspice

8.5 CONTROLLING AUDIO FILTERS

8.6 EXAMPLE PROJECT- AUDIO AMPLIFIER WITH 2-BAND EQUALIZER

8.7 CONCLUSIONS

8.8 SELF-STUDY QUESTIONS

9 ARDUINO AUDIO CONTROL

9.1 FINAL PROJECT OVERVIEW

9.1.1 Project Components

9.2 ARDUINO STATE CONTROL

9.2.1 Worked Example- Arduino State Control

9.3 ARDUINO DIGITAL FILTER CONTROL

9.4 FINAL PROJECT- ARDUINO CONTROLLED AUDIO AMPLIFIER WITH 2-BAND EQUALIZER

9.5 CONCLUSIONS

10 CONCLUSIONS

10.1 FUTURE WORK

10.1.1 Electronics Fundamentals

10.1.2 Arduino Control

10.1.3 Audio Electronics

10.2 FINAL NOTES

APPENDIX 1: SELF-STUDY QUESTIONS

APPENDIX 2: AC DERIVATIONS (CHAPTER 6)

Deriving Charge Over Time

Deriving an RC Time Constant

Deriving Capacitor Voltage

Deriving Capacitive Reactance

Deriving Series Impedance Magnitude

Deriving Series Capacitance

Deriving Parallel Capacitance

APPENDIX 3: RESISTOR VALUES