Titanium Science and Technology
PAYBACK Punkte
58 °P sammeln!
Introductory Papers.- Introductory Remarks.- Keynote Address.- Banquet Address.- Current Uses and Future Possibilities, Including Economics and Materials Policy.- Critical Review.- Manufacturing Exercise Involved in the Redesign of the Hawker Siddeley Trident (Tri-Jet) Fuselage.- B-1 Cost/Weight Trade Methodology.- Design and Development Support for Critical Helicopter Applications in Ti-6A1-4V Alloy.- Flat Rolled Beta Titanium Alloys for Airframe Application.- Applications of the High Strength Alloy Ti-4A1-4Mo-2Sn-0.5Si in European Aircraft Projects.- Titanium! The Bridge to Composites.- Tita...
Introductory Papers.- Introductory Remarks.- Keynote Address.- Banquet Address.- Current Uses and Future Possibilities, Including Economics and Materials Policy.- Critical Review.- Manufacturing Exercise Involved in the Redesign of the Hawker Siddeley Trident (Tri-Jet) Fuselage.- B-1 Cost/Weight Trade Methodology.- Design and Development Support for Critical Helicopter Applications in Ti-6A1-4V Alloy.- Flat Rolled Beta Titanium Alloys for Airframe Application.- Applications of the High Strength Alloy Ti-4A1-4Mo-2Sn-0.5Si in European Aircraft Projects.- Titanium! The Bridge to Composites.- Titanium Castings for Marine Propellers.- Titanium Tubing and Fittings for Deep Submergence Hydraulic Systems.- Some Technical Considerations on the Use of Titanium Condenser Tubing in Public Utility Power Generation Turbines.- Titanium Corrosion in Distillation Columns.- The Role of Titanium in Anodizing and Electroplating.- Recent Development in the Application of Titanium for Motorcars.- Winning and Refining.- Critical Review.- Murso Process for Producing Rutile Substitute.- Reduction of Ilmenite and Ilmenite Ores.- Methods of Titanium Powders Production.- The Interaction of Titanium with Refractory Oxides.- Potential Extractive Processes for Titanium Scrap Reclamation.- Consolidation, Primary and Secondary Fabrication.- Critical Review.- The Effect of the Rate of Filling Moulds on the Solidification of Titanium-Alloy Ingots.- Durarc¿ Process for Melting and Casting Titanium.- Some New Results about Casting of Titanium in the Electron Beam Melting Furnace.- Study of Residual Stresses in Cast Titanium Alloys.- Titanium Powder Metallurgy By Decomposition Sintering of the Hydride.- Titanium P/M Preforms, Parts and Composites.- Hot Isostatic Pressing of Titanium 6A1-4V.- Lubrication of Titanium Alloys under Conditions of Bulk Plastic Deformation.- The Influence of Process Variables on the Pressure Requirements for the Extrusion of Titanium Alloy Rods.- Titanium Precision Forgings.- Manufacturing Method and Mechanical Properties of Large Annular Forgings of Two-Phase Titanium Alloy.- Influence of Hot Working on the Properties of the Ti 6A1 4V Alloy with Special Regard to Heavy Sections.- The Manufacturing of Aircraft-Quality Hydraulic Tubing with the Ti-3A1-8V-6Cr-4Mo-4Zr Alloy.- Procedures and Precautions in Machining Titanium Alloys.- Smelting of Primary Ingots and Their Remelting in Plasma-Arc Furnaces with Cooled Molds.- Joining, Quality, Assurance, and Inspection.- Critical Review.- Metallurgical and Technological Features of Titanium Alloy Welding When Using Fluxes.- Microstructure Control in Welds of the Ti-6A1-6V-2Sn Alloy.- Factors Affecting the Ductility and Microstructure of Ti-6a1-6v-2sn Titanium Alloy Weldments.- Electron Beam Welding of Ti-6A1-6V-2Sn Plate.- Weld Optimisation and Fatigue Tests on Low Voltage Electron Beam Welded 2in (51mm) Thick Ti-6A1-4V Alloy.- Some Fatigue Properties of Welds in two Titanium Sheet Alloys.- Pressure Requirements for Diffusion Bonding Titanium.- Fatigue Behavior of Diffusion Bonded Ti-6A1-4V Having Very Small Defects.- Correlation of Diffusion Bonded Ti-6A1-4V Properties with Acoustic Emission, Pulse-Echo and Fractographic Data.- Failure Experience with and Failure Anticipation in Titanium Components.- Effects of Ti-6A1-4V Alloy Metallurgical Structures on Ultrasonic Response Characteristics.- The Effects of Stress on the Detection of Fatigue Cracks by Ultrasonic Technique.- Ultrasonic Inspection of Titanium Airframe Components.- Non-Destructive Inspection of Titanium Jet Engine Disks.- Measurement by X-Ray Diffraction of Macro-Stresses and Micro-Stresses in Titanium and a Titanium Alloy.- Nondestructive Detection of Hydrides and Alpha-Case in Titanium Alloys.
Andere Kunden interessierten sich für
