Synthesis, Characterization, and Applications of Functional Materials-Thin Films and Nanostructures

Herausgeber: Craciun, Valentin; Jain, Menka; Guilloux-Viry, Maryline

• Gebundenes Buch

Produktbeschreibung

'Nanostructures, Thin Films and Bulk Oxides - Synthesis, Characterization and Applications' and 'Solution Synthesis of Inorganic Functional Materials' Symposia were held at the 2014 MRS Spring Meeting.

Produktdetails

• Verlag: Cambridge University Press
• Seitenzahl: 246
• Erscheinungstermin: 11. Juni 2015
• Englisch
• Abmessung: 235mm x 157mm x 18mm
• Gewicht: 512g
• ISBN-13: 9781605116525
• ISBN-10: 1605116521
• Artikelnr.: 41966358

Inhaltsangabe

Part I. ZnO Thin Films and Nanostructures: 1. Optimization of annealing
conditions for ZnO-based thin films grown using MOCVD; 2. ZnO
nanostructures on electrospun nanofibers by atomic layer
deposition/hydrothermal growth and their photocatalytic activity; 3.
Electrosynthesized polystyrene sulphonate-capped zinc oxide nanoparticles
as electrode modifiers for sensing devices; 4. Effects of annealing on
structural and optical properties of ZnO nanowires; 5. Electrodeposited
Cu2O/ZnO heterostructures with high built-in voltages for photovoltaic
applications; 6. Antibody immobilization for ZnO nanowire based biosensor
application; 7. Thermal stability of post-growth-annealed Ga-doped MgZnO
films grown by the RF sputtering method; 8. Emission diversity of ZnO
nanocrystals with different growth temperatures; 9. Synthesis and
electrical characterization of ZnO and TiO2 thin films and their use as
sensitive layer of pH field effect transistor sensors; 10. Comparative
study of the antimicrobial effect of different antibiotics mixed with CuO,
MgO and ZnO nanoparticles in Staphylococcus aureus, Pseudomonas aeruginosa
and Escherichia coli cultures; 11. Effect of dopant oxidation state and
annealing atmosphere on the functional properties of zinc oxide-based
nanocrystalline powder and thin films; 12. The effect of oxygen defects on
activity of Au/ZnO catalyst in low temperature oxidation of benzyl alcohol;
13. Synthesis of ZnxMg1-xO nanocrystals and the assessment of their
antimicrobial activity against Escherichia coli; Part II. Multiferroics,
Magnetism, and Magnetic Materials: 14. Persistent photoconductivity in bulk
strontium titanate; 15. Epitaxial growth of ferroelectric Pb(Zr,Ti)O3
layers on GaAs; 16. Multilayer BiFeO3/PbTiO3 multiferroic ceramic
composites prepared by tape casting; 17. Effect of Ca and Ag doping on the
functional properties of BiFeO3 nanocrystalline powders and films; 18.
Magnetic and optical properties of Mn-doped SnO2 films; 19. Effect of
Gd-substitution at Y-site on the structural, magnetic and dielectric
properties of Y1-xGdxMnO3 (x=0, 0.05) nanoparticles; 20. Influence of
substrate temperature and post annealing on morphology and magnetic
properties of pulsed laser deposited Fe50-Ni50 films; Part III. Oxide Thin
Films and Nanostructures: 21. Photoactivated metal-oxide gas sensing
nanomesh by using nanosphere lithography; 22. Synthesis and
characterization of NaNbO3 mesostructure by a microwave-assisted
hydrothermal method; 23. High transmission and low resistivity cadmium tin
oxide thin films deposited by sol-gel; 24. Facile one-pot synthesis of
rhenium nanoparticles; 25. One-step microwave-assisted aqueous synthesis of
silver-based nanoparticles functionalized by glutathione; 26. Temperature
dependent electrical and dielectrics properties of metal-insulator-metal
capacitors with alumina-silicone nanolaminate films; 27. Soft lithographic
printing of titanium dioxide and the resulting silica contamination layer;
28. Electronic structures and optical properties of cuprous oxide and
hydroxide; 29. Cobalt oxide-tungsten oxide nanowire heterostructures:
fabrication and characterization; 30. Electrical properties at grain
boundaries influenced by Cr3+ diffusion in SnO2.ZnO.Nb2O5-films varistor
prepared by electrophoresis deposition; 31. Sol-gel synthesis of
nanocrystalline Ni-ferrite and Co-ferrite redox materials for
thermochemical production of solar fuels; 32. Synthesis of imprinted
polysiloxanes for immobilization of metal ions; 33. Chemical solution based
MoS2 thin film deposition based on dimensional reduction; 34.
Organometallic synthesis of water-soluble ruthenium nanoparticles in the
presence of sulfonated diphosphines and cyclodextrins.