George D. Vendelin, Anthony M. Pavio, Ulrich L. Rohde

Microwave Circuit Design Using Linear and Nonlinear Techniques

• Gebundenes Buch

Produktbeschreibung

Four leaders in the field of microwave circuit design share their newest insights into the latest aspects of the technology

The third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques delivers an insightful and complete analysis of microwave circuit design, from their intrinsic and circuit properties to circuit design techniques for maximizing performance in communication and radar systems. This new edition retains what remains relevant from previous editions of this celebrated book and adds brand-new content on CMOS technology, GaN, SiC, frequency range, and feedback power amplifiers in the millimeter range region. The third edition contains over 200 pages of new material.

The distinguished engineers, academics, and authors emphasize the commercial applications in telecommunications and cover all aspects of transistor technology. Software tools for design and microwave circuits are included as an accompaniment to the book. In addition to information about small and large-signal amplifier design and power amplifier design, readers will benefit from the book's treatment of a wide variety of topics, like:
_ An in-depth discussion of the foundations of RF and microwave systems, including Maxwell's equations, applications of the technology, analog and digital requirements, and elementary definitions
_ A treatment of lumped and distributed elements, including a discussion of the parasitic effects on lumped elements
_ Descriptions of active devices, including diodes, microwave transistors, heterojunction bipolar transistors, and microwave FET
_ Two-port networks, including S-Parameters from SPICE analysis and the derivation of transducer power gain

Perfect for microwave integrated circuit designers, the third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques also has a place on the bookshelves of electrical engineering researchers and graduate students. It's comprehensive take on all aspects of transistors by world-renowned experts in the field places this book at the vanguard of microwave circuit design research.

Produktdetails

• Verlag: Wiley / Wiley & Sons
• Artikelnr. des Verlages: 1W118449750
• 3. Aufl.
• Seitenzahl: 1200
• Erscheinungstermin: 27. April 2021
• Englisch
• Abmessung: 257mm x 185mm x 51mm
• Gewicht: 2000g
• ISBN-13: 9781118449752
• ISBN-10: 1118449754
• Artikelnr.: 43610982

Autorenporträt

George D. Vendelin is Adjunct Professor at Stanford, Santa Clara, and San Jose State Universities, as well as UC-Berkeley-Extension. He is a Fellow of the IEEE and has over 40 years of microwave engineering design and teaching experience. Anthony M. Pavio, PhD, is Manager of the Phoenix Design Center for Rockwell Collins. He is a Fellow of the IEEE and was previously Manager at the Integrated RF Ceramics Center for Motorola Labs. Ulrich L. Rohde is a Professor of Technical Informatics, University of the Joint Armed Forces, in Munich, Germany; a member of the staff of other universities world-wide; partner of Rohde & Schwarz, Munich; and Chairman of the Board of Synergy Microwave Corporation. He is the author of two editions of Microwave and Wireless Synthesizers: Theory and Design. Dr.-Ing. Matthias Rudolph is Ulrich L. Rohde Professor for RF and Microwave Techniques at Brandenburg University of Technology in Cottbus, Germany and heads the low-noise components lab at the Ferdinand-Braun-Institut, Leibniz-Institut fuer Hoechstfrequenztechnik in Berlin.

Inhaltsangabe

Foreword xvii

Preface To The Third Edition xix

1 RF/Microwave Systems 1

1.1 Introduction 1

1.2 Maxwell's Equations 11

1.3 Frequency Bands, Modes, and Waveforms of Operation 13

1.4 Analog and Digital Signals 15

1.5 Elementary Functions 26

1.6 Basic RF Transmitters and Receivers 32

1.7 RF Wireless/Microwave/Millimeter Wave Applications 34

1.8 Modern CAD for Nonlinear Circuit Analysis 37

1.9 Dynamic Load Line 38

References 39

Bibliography 40

Problems 41

2 Lumped and Distributed Elements 43

2.1 Introduction 43

2.2 Transition from RF to Microwave Circuits 43

2.3 Parasitic Effects on Lumped Elements 46

2.4 Distributed Elements 53

2.5 Hybrid Element: Helical Coil 54

References 55

Bibliography 57

Problems 57

3 Active Devices 59

3.1 Introduction 59

3.2 Diodes 60

3.2.1 Large-Signal Diode Model 61

3.2.2 Mixer and Detector Diodes 65

3.2.3 Parameter Trade-Offs 70

3.2.4 Mixer Diodes 72

3.2.5 PIN Diodes 73

3.2.6 Tuning Diodes 84

3.2.7 Q Factor or Diode Loss 94

3.2.8 Diode Problems 99

3.2.9 Diode-Tuned Resonant Circuits 105

3.3 Microwave Transistors 110

3.3.1 Transistor Classification 110

3.3.2 Bipolar Transistor Basics 113

3.3.3 GaAs and InP Heterojunction Bipolar Transistors 127

3.3.4 SiGe HBTs 141

3.3.5 Field-Effect Transistor Basics 147

3.3.6 GaN, GaAs, and InP HEMTs 158

3.3.7 MOSFETs 165

3.3.8 Packaged Transistors 182

3.4 Example: Selecting Transistor and Bias for Low-Noise Amplification 186

3.5 Example: Selecting Transistor and Bias for Oscillator Design 191

3.6 Example: Selecting Transistor and Bias for Power Amplification 194

3.6.1 Biasing HEMTs 196

3.6.2 Biasing HBTs 198

References 200

Bibliography 203

Problems 204

4 Two-Port Networks 205

4.1 Introduction 205

4.2 Two-Port Parameters 206

4.3 S Parameters 216

4.4 S Parameters from SPICE Analysis 216

4.5 Mason Graphs 217

4.6 Stability 221

4.7 Power Gains, Voltage Gain, and Current Gain 223

4.7.1 Power Gain 223

4.7.2 Voltage Gain and Current Gain 229

4.7.3 Current Gain 230

4.8 Three-Ports 231

4.9 Derivation of Transducer Power Gain 234

4.10 Differential S Parameters 236

4.10.1 Measurements 239

4.10.2 Example 239

4.11 Twisted-Wire Pair Lines 240

4.12 Low-Noise and High-Power Amplifier Design 242

4.13 Low-Noise Amplifier Design Examples 245

References 254

Bibliography 255

Problems 255

5 Impedance Matching 261

5.1 Introduction 261

5.2 Smith Charts and Matching 261

5.3 Impedance Matching Networks 269

5.4 Single-Element Matching 269

5.5 Two-Element Matching 271

5.6 Matching Networks Using Lumped Elements 272

5.7 Matching Networks Using Distributed Elements 273

5.7.1 Twisted-Wire Pair Transformers 273

5.7.2 Transmission Line Transformers 274

5.7.3 Tapered Transmission Lines 276

5.8 Bandwidth Constraints for Matching Networks 277

References 287

BIBLIOGRAPHY 288

PROBLEMS 288

6 Microwave Filters 294

6.1 Introduction 294

6.2